So…in a short sentence…the title. I have a server in a remote location which also happens to be under CGNAT. I only get to visit this location once a year at best, so if anything goes off…It stays off for the rest of that year until I can go and troubleshoot. I have a main location/home where everything works, I get a fixed IP and I can connect multiple services as desired. I’d like to make this so I could publish internal servers such as HA or similar on this remote location, and reach them in a way easy enough that I could install the apps to non-tech users and they could just use them through a normal URL. Is this possible? I already have a PiVPN running wireguard on the main location, and I just tested an LXC container from remote location, it connects via wireguard to the main location just fine, can ping/ssh machines correctly. But I can’t reach this VPN-connected machine from the main location. Alternatively, I’m happy to listen to alternative solutions/ideas on how to connect this remote location to the main one somehow.

Thanks!

  • Im_old@lemmy.worldEnglish
    1·
    7 months ago

    I’m self hosting headscale (foss implementation of tailscale control server) for this scenario. Works great!

    • iturnedintoanewt@lemm.eeOPEnglish
      0·
      6 months ago

      THanks…I haven’t tried Tailscale yet, I think I’ll get the “easier” commercial version just yet for this. Still learning on this.

      • Im_old@lemmy.worldEnglish
        1·
        6 months ago

        I’ve been told that zerotier is even better. Haven’t tried it myself (it looks more complicated to selfhost) but the guy suggesting it knows waaaaay more than me on these things. Just if you want to look into another option.

        For what it’s worth (from a random guy on the internet) selt-hosting tailscale is quite easy! 🙂

  • lemmyvore@feddit.nlEnglish
    0·
    7 months ago

    Install Tailscale on the remote server and leave it up. Whenever you need to connect to it launch Tailscale on another device that you have access to, and you’ll be able to connect to the remote server at its Tailscale IP.

    Tailscale consists of a config tool called tailscale and a daemon called tailscaled. The daemon needs to be up for connectivity, and it will raise a network interface called tailscale0 when it works. To connect/disconnect from the tailnet you say tailscale up or down. This is independent of whether the daemon runs or not – that’s a separate issue that’s usually dealt with by systemd or whatever service manager you use.

    Tailscale doesn’t need public IPs because all the clients connect outward to a pairing server, which uses STUN to negociate direct connections between the nodes. The connection keys always stay with each client machine, the established connections cannot be snooped by Tailscale, and the clients are FOSS to make sure of that.

    If by any chance the ISP of any node does aggressive UDP filtering STUN may not work and result in connections being relayed through a network of so-called DERP servers maintaned by Tailscale. These servers are reduced in number and locations so relayed connections will be bandwidth- and latency-limited. If STUN succeeds you’ll only be limited by each node’s internet connection.

    Tailscale can provide DNS names for the enrolled nodes if you want, but you can also assign fixed IPs to each node in the range 100.64.0.0/10. I’m not a huge fan of the provided DNS because it’s a bit invasive (works by replacing /etc/resolv.conf temporarily with a version that resolves via 100.100.100.100 on the tailnet, and integrating it with local DNS can be a chore as you can imagine). There’s an option for tailscale nodes to not accept this DNS.

    Make sure that services on the remote server that you want to access via Tailnet (also) bind to the Tailscale IP (or to 0.0.0.0).

    Should you mess up, so long as the Tailscale client is still up on the remote server and it has an internet connection you can still reach it by enabling the Tailscale “fake” ssh service, which works through the tailscale client rather than a real ssh daemon. But please read up on what it involves to have this fake ssh access available (you don’t want to have to issue a command on the remote server to enable it).

    • iturnedintoanewt@lemm.eeOPEnglish
      0·
      6 months ago

      Thanks…I think I have now both containers in the home and remote servers within the tailscale network, showing their own IPs. This will make the site accessible via SSH, if I get this right. I’m not sure though how to route whichever remote server I build to the home network

      • lemmyvore@feddit.nlEnglish
        1·
        6 months ago

        You mean how to expose the local services on the machine via Tailscale? You can use the TS_DEST_IP env var. Let me show you my compose.yaml:

        services:
  tailscale:
    image: tailscale/tailscale:v1.62.0
    container_name: tailscale
    cap_add:
      - NET_ADMIN
      - SYS_MODULE
    environment:
      - TS_HOSTNAME=tailnet-node-name
      - TS_AUTHKEY=tailnet-node-key
      - TS_STATE_DIR=/var/lib/tailscale # see below for persistence
      - TS_ACCEPT_DNS=true # to resolve tailnet names (not necessary if you use IPs)
      - TS_USERSPACE=false # to be able to raise tailscale0 interface
      - TS_DEST_IP=local-ip # the IP where you bind services you want to expose
      - TS_ROUTES=192.168.1.0/24 # optionally expose other local devices 
    volumes:
      - "./data/var/lib/tailscale:/var/lib/tailscale" # persist daemon preferences
      - "/dev/net/tun:/dev/net/tun" # to be able to raise tailscale0 interface
    deploy:
      resources:
	 limits:
	   memory: 256M
	   pids: 100
    restart: always

        With TS_USERSPACE=false Tailscale will use kernel access to raise tailscale0 and allocate the tailnet IP you’ve specificed in Tailscale admin.

        (TS_USERSPACE=true doesn’t use a network interface at all, you have to use a forward HTTP or SOCKS5 proxy. If you use =true and set up a proxy you don’t have to use TS_DEST_IP.)

        With TS_DEST_IP you can bridge the tailnet IP to a local IP. By choosing that local IP well you can expose services to Tailscale selectively.

        The simplest approach is to have docker services listen on 0.0.0.0 (happens by default if you don’t specify IP in the “ports:” section, and put the machine’s loopback or LAN IP in TS_DEST_IP. That way you’ll expose all the services automatically.

        But you can also expose things explicitly. Let’s say the machine LAN IP is 192.168.1.1. You make up 10.100.100.100 on the host specifically for Tailscale exposure so you say TS_DEST_IP=10.100.100.100. Then in your “ports:” section in compose you add ports explicitly depending on what you want them exposed on. Let’s say you want Jellyfin exposed on both LAN and Tailscale, you add an entry for - 192.168.1.1:8096:8096/tcp and one for - 10.100.100.100:8096:8096/tcp. You only want CUPS exposed on the LAN not on Tailscale so you only add - 192.168.1.1:631:631/tcp for it. For Deluge you want to use the web interface on the LAN so you say - 192.168.1.1:8112:8112/tcp but you want RCP over Tailscale so you can use a phone admin app so you say - 10.100.100.100:58846:58846/tcp.

        You get the idea. Yeah it’s a bit more work to specify everything explicitly but it’s a lot more precise (and you can still use the default and listen on 0.0.0.0 for when you want to expose everywhere).