To be fair,

+1 for FMA: Brotherhood though, that shit slaps and given the above commenter’s statement I also think they’d like it

Scarlet Maiden is great too if you’re a fan of Rogue Legacy.

…uh, I’ve heard.

Just as the founding fathers intended.

The Tower of Crabel?

Deflection via humor would be my guess

“All that colonizing didn’t amount to a hill of beans”

FunkFPV, is that you?

Kidding. Sounds like you’re still mostly winning though, good on ya.

I’m only tangentially familiar with this, and more information may have come out lately, but I don’t think the above comment was related to anything he’s done in film lately.

Recently Tenacious D did a show (shortly after a shooting at a Trump rally) and Kyle Gass was presented with a birthday cake. He is reported to have said “Please don’t miss next time” before blowing out the candles. Jack Black has stated that all plans and tours for Tenacious D have been put on hold indefinitely and that he was “completely blindsided” by this move from Kyle. Some fans have themselves claimed to be blindsided by Jack’s response, arguing that he should have had Kyle’s back.

I tried to relay that with as little bias as possible, but I am no journalist. For my part I understand cancelling tours - saying that kind of thing tends to put a target on your back for people with more guns than brain cells, but I think cancelling EVERYTHING Tenacious D related may have been a step too far. Also, again, more information may have come out since I read about this.

I have this one too and I love it. All it’s really missing is a way to remap the back paddles to non-controller buttons and it’d be an easy 10/10. As it is, though, 8.5 or 9, still very very good.

Fair enough. I think it’s safe to say that my reply was a little heated. You are, of course, correct. I will edit my comment.

I had to look that up, but you are correct. He said it while out promoting 2049. Thank you for bringing that to my attention.

Of course they are! I never disagreed with that. They are “more human than human”. That’s not even a counter argument to what I said, which is “this one specific human, who has basically forgotten how to BE human, rediscovers the joy of humanity through his interactions with non-humans who are ironically more human than he is”.

DECKARD👏 IS👏 NOT👏A👏 REPLICANT👏

I will bang this gong 'til the day I die.

The whole point of the movie, besides the cyberpunk dystopia that it created and popularized, is that Deckard is a HUMAN who acts like a ROBOT. He has no joy, no purpose, no meaning. And he rediscovers all of that, ironically, from his interactions with replicants - Roy Batty and Rachael most of all. It’s the Sarah Connor, end of Terminator 2 thought that “if a machine - a Terminator - can learn the meaning of life, perhaps there’s hope for the rest of us.”

And that DOESN’T FUCKING WORK if Deckard is a replicant. Philip K Dick, Harrison Ford, EVERYONE on the production EXCEPT Ridley Scott either knew this or figured it out. But because Mr. Auteur decided to share his braindead take and even cut a scene from a whole-ass other movie into Blade Runner to make you think MAYBE the robot-killer cop is himself a robot because “whoa man how mind-blowing”, now we have to get people saying that’s how it is for the rest of humanity.

Deckard is not a replicant. END OF.

edit: it has been pointed out to me that Harrison has reversed his stance on whether Deckard is a replicant, and my last sentence was factually incorrect in that there IS, of course, ambiguity in the film about who’s a replicant or not. Making Deckard into one, IMO, is still a braindead take that makes the movie subjectively worse, but I should still try to be accurate.

Speaking as someone who has recently gone through this headache: if you’re fortunate enough to have your games on their own partition, you will probably want to migrate said partition over to a Linux filesystem (ext4, btrfs, etc.) sooner rather than later. Particularly for Steam games - it’s possible to mount NTFS partitions on Linux and you might even be able to get the partition to mount as read/write somewhat reliably, but getting Steam on Linux to parse those directories and read the installed games is… … well, it isn’t worth it, frankly. Easier to just bite the bullet and be done with it.

That was the most difficult part of transitioning to Linux for me, though. Most everything else either worked out of the box or was a breeze to set up. Even the printer - go figure. Anyway. You got this!

I don’t know if you’re being serious or sarcastic.

Yes, please do.

And his ATOMICS!

Did you know that the only part of yourself you can kiss in the mirror is your lips?

Don’t ask me how I know.

Ooh, I’m torn. They’re both NES “games” - Rocky & Bullwinkle had sluggish controls, awful hitboxes, and I can only describe its graphics AND sound design as offensive. That said, at least it technically played like a game. Where’s Waldo didn’t even have that. I think Where’s Waldo is the worst, but it’s close.

Glad someone else said it. Conflicting opinions about Linus aside, dude makes stuff he’d want to wear/use and it shows in the quality.

I have a really basic one. Some caveats - I’ve also used Windows my whole life (up until about 2 weeks ago), but I’m comfortable getting into a command prompt and/or powershell to tweak stuff. Also, I had a spare SSD lying around and extra space on my installed HDD.

Step 0 (arguably the hardest): pick your distro.
I went with Arch - but if you want something Arch-based but a little less barebones, you might do fine with Manjaro or EndeavourOS. This is totally up to you though (I’m in the process of migrating my wife to openSUSE). “But Gaspar, you crazy old man,” you may ask, “what all is out there?” Well… there’s a lot. Over 600 active distros, if you believe this random-ass tech blog, and countless other hundreds (or thousands) that are old, outdated, no longer supported, or were cooked up by one dude specifically for their own system and will never be uploaded. There are a couple of tools that can help narrow this down, but you’re really just going to have to poke around and see what appeals to you.

Step 1: Test in a virtual machine first.
This is optional, but it may help you make up your mind: pick a few different distros and install them in virtual machines, using VirtualBox or something. You can poke around in there and see how things “feel” before you make up your mind, without worrying about messing something up.

Step 2: Load up a USB stick.
Ventoy. You don’t HAVE to use this, strictly speaking. You can just get Etcher or Rufus or something, use them to write your chosen distro’s ISO to a USB stick, and install that way. But Ventoy sets up a separate partition on your USB stick where you can grab a bunch of different ISOs and drag-and-drop in there, and load up whichever one you want. Pretty handy.

Step 3: Go into Disk Management and free up a partition for your chosen distro.
This is up to your taste (I just installed it into its own whole SSD) but I’d set aside at least 256GB for the OS and the packages you’ll want to install once you get in there. Again, though, YMMV.

Step 4: Install that sucker!
OK, now boot into your ISO through the USB stick you prepared earlier and install the sucker on your new partition. Most distros will have you set up a root password and give you the option to create a user. YOU WANT TO DO THIS. You do not want to always access your system as root - that way lies madness (and it’s wildly insecure). You may also get a choice of desktop environments. This is up to your taste but I went with KDE Plasma because I have a Steam Deck (which also runs on a variant of Arch) and I was already used to the interface.

Step 5: Migration start
After you’ve gotten set up and a little comfortable poking around (maybe you already figured out how you want to start setting up when you were testing VMs in Step 1 earlier), it’s time to start partitioning. There are a few GUI partition managers you can use - I used KDE Partition Manager, but there’s also Gparted and a few others.

Once you’re in whichever program you’ve chosen to set up your partitions, you’ll want to proceed in this basic order:

• Shrink your Windows partition(s) if they are taking up the entire drive, and you have the space to do so (if not, we’ll get to that)
• Create new Linux partitions in the filesystem of your choice (again, will explain this shortly)
• Mount both your Windows and Linux partitions and copy from one to the other
• Once you’re happy that everything’s copied over, delete the Windows partition(s) (unless you’re planning on dual-booting, in which case keep the partition with your Windows install)
• Finally, extend your new Linux partition(s) to cover the whole drive

Step 6: Wait what?
Well, maybe your Windows drive is full, or there isn’t enough space on the new partition to copy everything over. This is why I mentioned the spare SSD. You can plug that in, if you have one, and use it as a placeholder to copy your files to while you reformat your drive and then copy everything back.

Also - filesystem of your choice? Well, Linux has a few options for partition types: ext4, btrfs, zfs, and a bunch of others. You’ll have to check them out and see which makes the most sense for you. I personally just reformatted everything as btrfs. It may not have been the most efficient choice, but it’s worked out for me so far. The main issue here is the standard Windows NTFS file system. Now - you CAN keep a lot of your data on an NTFS partition, especially if you want to dual boot Windows for a while and get used to things while still having that familiar lifeline (or, like me, if you have some games that still just don’t play well with Linux yet). Here’s the thing, though: thanks to a driver you can download, you can fairly easily get Windows to mount your btrfs partitions (I did it and even still have my drive letter associations). Plus, if you are a heavy Steam gamer, while you CAN get Steam on Linux to read your NTFS partitions… it’s a huge headache, and it isn’t worth it IMO (and, in my experience, I couldn’t get my NTFS partitions to STAY mounted as read/write). Better to just bite the bullet.

If you are planning on dual-booting, of course your Windows partition will still need to be NTFS. But if you have the disk storage to copy everything over, you can have everything else converted to whatever combination of Linux partitions you want in a few days (took me about 3, but I also had 10-ish TB to copy over and I had to do half of that twice).

Final Thoughts
Depending on whichever flavor of Linux you opted for, you may boot into GRUB, which is a bootloader that gives you some pretty neat configuration options - one of those options is the ability to boot into all your existing OS installs, including your Windows installation. Once you get a bit more familiar with Linux you may wish to make your Linux partition the default, secure in the knowledge that whenever you want, you can just hit down a couple of times, then Enter, and boom - you’re in Windows. Just be careful, because Windows recently pushed an update that may have broken this currently. I think it’s a nice touch, though.

I have rambled on long enough at this point and I’m sure someone else can point out several hundred things I missed - again, I am still a Linux newbie. But the best way to learn this stuff is just to do it, and depending on your comfort level and familiarity with Windows it shouldn’t take you long to get up to speed. Good luck!