Not one I overheard but one were I was overheard. In Paris at a restaurant where my girlfriend and I (anglophones) commented on the couples baby beside us. She said it was such a cute baby. I countered the most babies are cute so it should go without saying. You really only have to comment when they are butt ugly like in Seinfeld. It was a fun discussion which made us both laugh. Mid meal the couple got up and said in English that they enjoyed it too.

The sound of Grove after his crash is going to haunt me for a while

You might want to check the battery health on those phones. When the battery gets doggy the performance is affected (to prevent app crashes and system crashes).

They can do a remote diagnostic to figure out where the issue is. Also try booting in safe mode. Hold down the left shift key while booting.

It does sound like a logic board issue though.

Just an idea. Copy all the data you can from that external drive to something else just in case that’s all you can get. Plug the external drive into the Mac with the bad drive. Connect the Mac to your network with a Ethernet cable, turn on the Mac while doing command option r combo when you see the Apple. Go to disk utility and format the external to hfs (it will wipe the disk). Exit disk utility and go to the install mac menu. once install on the external drive is complete restart while holding down the alt key and select the external. Boot off the external drive. Recover data by copying it to the external boot drive or another external you have. You may want to test the command option r first and I would disconnect the failing HDD during most of that process.

Try deluge, it’s been pretty bulletproof for me once configured.

Did you try to go into the uefi setting to see if the keyboard was functioning as expected? This will eliminate any software issues with drivers and OS. you can go into the security/ setup password to type. If it fails it’s a hardware issue, if it works then it’s software (probably).

I haven’t heard that one before. I don’t have an answer for you but I have some questions. Is there any drive access when it’s doing that? Are you sure it’s all the drives making that noise not just one? Are they all doing that shudder at the same time? Is there any firmware updates available for the new drives? Is there a firmware update available for the controller? did you run smart tests on the drives?

That was my first thought too. Regardless it’s got to be uefi/bios related as it’s across OSes

Try using pcpartpicker.com. You can do your build on the site and it will list the best deals for the components you choose. As a bonus it will check to see if there are some glaring incompatibilities at the same time.

I love my ER3 lite and ER-X. I was totally surprised when they came out with a new firmware for it. It’s still beta but it was a relief to know they haven’t abandoned their edge routers.

You could buy a pfsense capable mini-pc ~$200. It will give you, 1 wan port and 2 or 3 lan ports or repurpose an old desktop by updating it with a dual network card. The pfsense mini pc will use a lot less power long term. Then use your routers in access point mode, one for your IOT on 2.4ghz and one on 5ghz for the other stuff. You can set up the firewall to prevent the iot network on the second lan from seeing anything on the primary lan but still have full access to devices from the primary to the IOT network.

Easier solution is what was already suggested is by using vlans with one router and the setup the second router in access point mode for the IOT

If the license is registered to that system changing the hard drive and reinstalling the SAME version of windows won’t be an issue. MS saves your system’s “fingerprint” and as long as you don’t change too many parts, it will recognize it and attach the license back to it.

If you do lose the license on reinstall, there are site that will sell you a cheap license, buyer beware, or ultimately you could switch over to something like truenas (core or scale) to run plex which is license free.