![PS4 controller to USB C conversion complete [Rule]](https://lemmy.blahaj.zone/pictrs/image/63a58493-8f98-42d5-886f-9725bfd480b8.webp){kind=link}
I know the carve out could have been a bit better but itās rock solid and only bothers me a lot. (Iāll fix it in the morning)
Link to the conversion boards, theyāre only ā¬10 a piece and are made by an independent maker in Norway.
I know the carve out could have been a bit better but itās rock solid and only bothers me a lot. (Iāll fix it in the morning)
Link to the conversion boards, theyāre only ā¬10 a piece and are made by an independent maker in Norway.
It was super easy to do, it took me less than 15minutes per controller.
It took longer to swap the thumbsticks with aluminum sticks than it did to swap those boards.
Iād highly recommend it!
Just be sure to order the correct boards as thereās a bunch of different versions and theyāre not interchangeable (for the most part)
EDIT: Spleling.
Edit2: Also donāt be afraid to break the plastic clips that aid in holding the controller together, I clip them off normally when I take a device apart and the 4 Philips screws that hold the controller together are plenty to hold it together without them.